Fraunhofer IGB researchers join energy-efficient drying with superheated steam industrial drying processes; up to 80% energy savings
Energy-Efficient Electric Drying With Superheated Steam
August 3, 2026 Page 1 | 3 Research News — Decarbonization in industry Energy-Efficient Electric Drying With Superheated Steam Industrial drying processes consume large amounts of energy and nega- tively impact the climate since they burn fossil fuels to heat air. Researchers at the Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB are working with industry partners on a new approach to decarbonize this process: Instead of hot air, they are using superheated steam. Combined with a heat pump and smart controls, their superheated steam drying pro- cess saves significant amounts of energy and eliminates the need for natural gas. Drying is a key process widely used across many sectors, including the paper, cement and chemical industries. It is a key step in the production, processing and treatment of minerals, food or detergents, for example. Countless materials, products and raw materials are dried to preserve them, allow further processing or maintain their quality. Current drying processes rely on hot air. Researchers at Fraunhofer IGB are now taking a different approach: In the LowCarbDry project, they are replacing hot air with superheated steam at atmospheric pres- sure while electrifying the drying process using a heat pump. The team is working closely with Evonik Operations GmbH and Pergande Group on this development. The aim of the project is to significantly lower energy consumption and support energy systems integration by shifting from fossil fuels such as natural gas to renewable electricity. By using electricity-generated su- perheated steam, the partners aim to reduce drying energy demand by a factor of 2 to 4, de- pending on the drying method and temperature level. Superheated steam lowers energy consumption “Industrial drying uses a significant amount of energy. During hot-air drying, the air must be heated for the moisture to evaporate. This usually involves burning natural gas, which dra- matically increases carbon emissions. But most importantly, some of the energy is lost to the atmosphere through the warm exhaust air,” says Antoine Dalibard, a research scientist at Fraunhofer IGB. “Instead of drying moist products with hot air, we use superheated, dry steam in a closed-loop system. Closing the process gas circuit minimizes heat loss to the out- side, making the process more energy efficient than traditional hot-air drying methods,” Dalibard explains. The excess steam released from product drying can then be condensed. This produces condensation heat at a temperature of about 90 to 100 °C, which can be re- used for many other processes or fed into a local heating network.
August 3, 2026 Page 2 | 3 Increasing the share of green electricity while further reducing operating costs Using a heat pump, the process can be further electrified, saving energy, increasing energy efficiency and reducing operating costs. “The heat pump increases the temperature of the low-temperature steam from the drying process so the heat can be reused in the further dry- ing process,” Dalibard explains. Recovering heat in this way can further boost the energy effi- ciency of an industrial plant. Using superheated steam as a drying medium also allows for the integration of a special type of open heat pump: a system based on mechanical vapor recom- pression. Compressors raise the pressure of excess steam generated during the drying pro- cess. The compressed steam is then condensed and reused to provide the heat required for drying, resulting in significantly improved energy efficiency. When combined with an innovative control system, the plant can operate the drying process more flexibly: Model predictive control allows the system to run only when electricity is cheap thanks to high renewable energy availability. This increases the share of renewable electricity while further lowering operating costs. Together, these three innovative approaches—steam drying, heat pumps and greater flexibility—reduce energy consumption by up to 80 percent, significantly decarbonizing industrial drying processes. Superheated steam technology can be used in a variety of dryers, including belt, drum and spray dryers. “We have already tested our drying process in a wide range of applications. The process enabled us to dry mineral raw materials, construction materials, organic residues, along with food and animal feed, while preserving product quality and maintaining high en- ergy efficiency,” says Dalibard. The project partners have already put pilot systems for super- heated-steam spray drying into operation.
Fig. 1 Using electricity-generated superheated steam instead of hot air for industrial drying pro- cesses can drastically lower energy consumption. © Fraunhofer IGB
The Fraunhofer-Gesellschaft, headquartered in Germany, is one of the world’s leading organizations for applied research. It plays a major role in innovation by prioritizing research on cutting-edge technologies and the transfer of results to industry to strengthen Germany’s industrial base and for the benefit of society as a whole. Founded in 1949, the Fraunhofer-Gesellschaft currently operates 74 institutes and research units throughout Germany. Its roughly 30,000 employees, predominantly scientists and engineers, work with an annual business volume of 3.6 billion euros; 3.2 billion euros of this stems from contract research.
August 3, 2026 Page 3 | 3
Fig. 2 Superheated steam enables energy-efficient and gentle drying of a wide variety of prod- ucts such as lime, straw, couscous or insect larvae. © Fraunhofer IGB
Fig. 3 The project partners have already commissioned a pilot system for superheated-steam spray drying as part of the LowCarbDry project. © Fraunhofer IGB
Contact — Contacts
Monika Landgraf Fraunhofer-Gesellschaft, Munich Director of Corporate Communications Phone: +49 89 1205-1333 presse@zv.fraunhofer.de
Claudia Vorbeck Fraunhofer Institute for Interfacial Engi- neering and Biotechnology IGB Head of Marketing and Communica- tions Phone +49 711 970-4031