---
title: "voestalpine Steel \u0026 Service Center GmbH EU Declaration of Conformity Linz, Austria; No harmonized standards yet for PPWR 2025/40"
sdDatePublished: "2026-08-12T13:18:00Z"
source: "https://www.voestalpine.com/ssc/en/content/download/72408/file/260807-Konformit%C3%A4tserkl%C3%A4rung-Verpackungsverordnung-SSC-Linz-EN_V2.pdf?inLanguage=eng-GB"
topics:
  - name: "regulation of industry"
    identifier: "medtop:20000636"
  - name: "transport"
    identifier: "medtop:20000337"
  - name: "business strategy and marketing"
    identifier: "medtop:20000192"
  - name: "iron and steel"
    identifier: "medtop:20000319"
locations:
  - "Linz"
  - "Austria"
---


voestalpine Steel & Service Center GmbH EU Declaration of Conformity Linz, Austria; No harmonized standards yet for PPWR 2025/40

voestalpine Steel & Service Center GmbH

EU Declaration of Conformity
(in accordance with EU Packaging Regulation 2025/40, Annex VIII)
As of August 10, 2026 – Rev. 1

1. Unique identifier of the packaging:
All packaging for shipments of longitudinally and transversely slit steel strip.
Breakdown according to the packaging catalogs:
»
Packaging Catalog: Cold-Rolled Strip Production – Cut-to-length line
Packaging in batches, packaging on pallets, special packaging for shaped blanks, packaging
with standard and special pallets
Packaging codes from P000 to P999

»
Packaging Catalog: Cold-Rolled Strip Production – Slitting line
Horizontal (“eye to the sky”) and vertical (“eye to the side”) packaging, packaging on pallets, and
special packaging
Packaging codes from R000 – R999 and C000 – C999

»
Packaging Catalog: Hot-Rolled Strip Production – Slitting line
Packaging for slit strip coils (eye to the side) and rings (eye to the sky); packaging codes C000–
C999 and R000–R999

»
Packaging Catalog: Hot-Rolled Strip Production – Cut-to-length line
Standard packaging, film packaging, paper packaging, and seaworthy packaging for sheet
metal
Packaging codes P000 – P999

2. Name and address of the manufacturer and, where applicable, the manufacturer’s authorised
representative:
Manufacturer of the complete transport packaging:
voestalpine Steel & Service Center GmbH
voestalpine-Straße 3
4020 Linz
Austria

3. This declaration of conformity is issued under the sole responsibility of the manufacturer.

4. Object of the declaration (identification of the packaging allowing traceability): description of
the packaging:

voestalpine Steel & Service Center GmbH

The packaging in question consists of the following components/materials, which can be separated
manually:
Material
Packaging component
Wood
Pallets, lumber, hardboard, spacers, support timbers, coil slides
Cardboard
Backing cardboard, cardboard edge protectors
Plastic
Adhesive tape, plastic strapping and edge protectors, stretch film, VCI film, and
cover film, labels
Adhesive
Assembly adhesive
Paper
Masking, backing, or wrapping paper; strips on top wood; VCI paper
Steel
Edge protection, inner rings and outer rings, separator plates, locking sleeves,
label hooks, nails

5. The object of the declaration referred to point 4 is in conformity with the relevant Union
harmonisation legislation:
EU Packaging Regulation 2025/40 regarding the provisions in effect at the time of delivery

6. References to the relevant harmonised standards or the common specifications used or
references to the other technical specifications in relation to which conformity is declared:
No harmonized standards currently exist for PPWR 2025/40

7. The notified body:
Not applicable

8. Additional information:
Contact for any inquiries:
Please contact the salesperson whose name you know, or alternatively
ssc@voestalpine.com
https://www.voestalpine.com/ssc/

4020 Linz, August 10, 2026 voestalpine Steel & Service Center GmbH

This document was generated automatically and is valid even without a signature.