Studer Innotec next1 inverter-charger setup; three options: app, manual Wi-Fi, nx interface
FAQ - How to setup and configure the next1 inverter-charger - Studer Innotec
Estimated reading time: 1 min read
What is an next3 inverter?
What is an next1 inverter?
Does the next series of inverter-chargers have a smartboost function?
Can I do AC coupling with next inverter-chargers?
Is it necessary to have an nx interface?
What is the Smartboost function?
I have a weak grid and I want to have a backup genset
Can you guarantee that your inverter will be able to start my load?
I have a weak grid with a low power connection capacity
How to update the software of my next?
How to access the web interface of my next3?
Which devices are compatible or not with the next inverter-chargers series?
Can the next series of inverter-chargers work with high-voltage batteries?
Where can I find the battery compatibility list?
How to turn ON AC flex?
How to allow individual phase on AC source
What are the type of earthing with the next series?
How to disable grid-feeding (injection)?
Is it necessary to install an external smart meter?
I need more solar power than the 16kW built into the next3
How can I keep the battery fully charged for backup?
How to enable dynamic tariff-based charging (Smart Control) on the Studer web portal
How to setup and configure the next1 inverter-charger
Can the next series of inverter-chargers be used in offgrid applications?
Can the next series of inverter-chargers operate without a battery?
Battery is fully discharged and my system is shutdown, what can I do?
How to change SOC % for backup?
The battery is not discharging despite being full, what’s going on?
Lithium batteries and offgrid, what are the point to take care of?
Can I modify settings remotly to avoid to go onsite?
Can the next1 be used with a physical screen (nx interface)?
How to share an installation on the Studer Portal?
Does Studer offer an API for developers?
How to find the IP address?
I have errors on my nx interface
How to restart the nx interface?
Products Hybrid inverters Battery inverters Solar chargers Integrated solutions
Hybrid inverters Battery inverters Solar chargers Integrated solutions
Digital products Monitoring tools Studer web portal On site user interface
Monitoring tools Studer web portal On site user interface
Support Downloads Technical support After sales service FAQ Contact our support AI technical assistant Battery compatibility
Company Contact Production and R&D Our team Quality + sustainability Partners and distributors News Careers Exhibitions and training
Products Hybrid inverters next3 next3 rack Battery inverters next1 xtender xts xtender xtm xtender xth aj 275-400 aj 500-700 aj 1000-1300 aj 2100-2400 Solar chargers variotrack vt 40 variotrack vt 65 variotrack vt 80 variostring vs 70 variostring vs 120 Integrated solutions infra
Hybrid inverters next3 next3 rack
Battery inverters next1 xtender xts xtender xtm xtender xth aj 275-400 aj 500-700 aj 1000-1300 aj 2100-2400
Solar chargers variotrack vt 40 variotrack vt 65 variotrack vt 80 variostring vs 70 variostring vs 120
Digital products Monitoring tools User interface Studer web portal
Support Downloads Technical support FAQ AI technical assistant Battery compatibility Contact our support After sales service
Company Contact Our team Partners
distributors Quality + sustainability Production and R&D News Exhibitions and training Careers
Studer Innotec SA Rue des Casernes 57 1950 Sion Switzerland
Tél. +41 (0)27 205 60 80 info@studer-innotec.com
© Studer Innotec SA. All Rights Reserved.
There are three ways to set up your next1 inverter
Our advice: The first option is to use our Studer monitoring app . The advantage of this app is that it simplifies the process of connecting to the Wi-Fi and the web interface of your next1 inverter-charger, and automatically creates and links your installation to our online monitoring system (only if you wish to monitor the installation remotely). Instructions on how to use this option can be found on page 9 of your device’s quick guide, which is supplied with it and is available to download from our downloads page .
The second option does not require you to install our app. However, it takes slightly longer and involves more steps, as you need to connect manually to the device’s Wi-Fi and then set up the link between the installation and our monitoring system (only if you wish to monitor the installation remotely). Instructions on how to use this option can be found on page 10 of your device’s quick guide, which is supplied with it and is available to download from our downloads page .
The third option requires the use of the ‘nx interface’ accessory, which allows you to configure and monitor your Next1 using a physical display. In this specific case, you must connect your interface correctly to the nx communication bus. An incorrect connection, or connecting a device that is not compatible with the communication bus, may result in the destruction of the devices. Information on connecting to the communication bus can be found in the next1 manual, section 5.5, available on the downloads page.